The HDD Demodulator permits the delivery of digital television signals in analog format directly to a television. They also interface easily with existing analog modulators on CATV networks. This high performance digital receiver allows for the reception and demodulation of an 8VSB (Off-air SD/HD digital TV Signal) or QAM (Digital CATV) signal into a baseband NTSC video and audio output. Closed Captioning Support Non-Volatile Memory Agile Input LED Channel Display

The HPH-860 frequency agile processors have been designed to convert any off-air cable channel input to any cable channel. All channel conversions are performed using simple front panel buttons and a large LED display indicating input and output channels. Frequency control is accomplished by a microprocessor controlled, PLL synthesized tuning circuit to assure accurate, stable operation. The HPH-860AD hetrodyne processor can be used to process digital off-air or cable channels while retaining the digital format. 60 dBmV Output Precise Signal Regulation Front Panel LED Channel Display Switching Power Supply (Operates from 90-260 VAC)

HSA-* SINGLE CHANNEL AMPLIFIER The HSA is a highly filtered, AGC’d, single channel amplifier capable of providing the highest off-air signal performance in an adjacent channel head-end. The high out-of-band rejection coupled with a low input AGC threshold make the HSA the ideal choice for on-channel processing. A low noise input amplifier provides the cleanest pictures at low-input levels. Built-in Adjacent Channel Filters Low Noise Input Circuitry Low AGC Threshold (-2dBmV) High Out-of-Band Rejection AC Convenience Outlet

HCA-3051RK and HCA-3086RK are high-output hybrid rack-mountable amplifiers perfect for any head-end system. These high performance amplifiers use push-pull CATV hybrid circuitry providing extremely low noise and distortion. Front panel adjustable slope and gain controls allow easy system balancing.
Push-Pull CATV Hybrid Circuitry
High Output
Adjustable Gain and Slope
-30 dB Output Test Port
Auxilliary AC Outlet

RACK MOUNTED MULTISWITCHES
Single Satellite Switch
The HMS-16APR is a rack mounted multiswitch specifically designed for SMATV applications. The switch generates the voltage required for powering a dual LNB (13 & 18 volts). Also provides amplification to help overcome the insertion loss of the 16 outputs.
Multi-satellite Switch
The HMS-412ARK is a 4 LNB input, 12 output multiswitch designed to provide solid state multi-sat switching for head-end systems. This unit provides 13 and 18 volts as well as 22 kHz tone to lock the LNB’s on the required satellites.
Single Satellite Input (HMS-16APR)
Multi-Satellite Input (HMS-412ARK)
Low Distortion Amplification
Provides LNB Powering
Generates 22 kHz Tone (HMS-412ARK)
High Isolation
High Reliability

The HCG-12 and HCG-24 are 12 and 24 input passive head-end combiners, intended to combine multiple modulator and processor inputs into one output while maintaining the highest isolation between ports. The HCG-12 and HCG-24 offer 1 GHz passband performance.
Directional Coupler Design
Low Insertion Loss
Front Panel Test Port
High Port-to-Port Isolation

AHC-16-860 ACTIVE COMBINER The AHC-16-860 is a high isolation, 16 channel active head combiner. With its internal CATV hybrid push-pull amplifier, the AHC-16-860 is able to compensate for its insertion loss and drive the cable system as well. The AHC-16-860 features a front panel gain control and a -20 dB test port. CATV Hybrid Amplification High Output High Isolation Low Distortion AC Convenience Outlet

The SHC converter is ideal for use in head-end and local origination applications. In head-end applications, the SHC is used to convert the incoming sub-band (T7 – T13) to VHF (7 – 13).
For local origination applications, the SHC can be used in offices, hospitals, or any situation where sub-band can be utilized to allow a TV within the system to view channels not available to others. These converted sub-band channels can then be redistributed using standard processors and demodulators.
Converts Sub-Band to High-Band
LED Power Indicator
Can be Used with Optional SBD Sub-Band Diplexer

The MOR-71 is a standard 71″ equipment rack. The rack is solidly constructed from 12-gauge steel with fine-thread panel mounting screw holes and a scratch resistant grey hammer-tone finish. The rack has multiple shelving options and a mounting capacity of up to 40 1 3/4″ rack devices. The vertical structure is suitable for all industry standard 19″ panel widths and rack footprint is 2′ x 2′ for added stability. Meets EIA standard RS310C 19″ rack spacing.

The universal receiver rack from Holland has an adjustable shelving system which can be used to mount up to 8 satellite receivers vertically. Perfect for hotels and other applications which need multiple receivers in limited space. The RK-UNIV provides cross platform versatility enabling you to mount any type of receiver or media player in the head-end system without the need to improvise or use special hardware. The universal receiver rack houses up to 8 receivers (depending on the model) and can be adjusted in all directions to accommodate different sizes. The racks are slotted for ventilation and all mounting hardware is included.
Houses up to 8 receivers
Multi-directional adjustment capabilities
Black, static resistant powder coated steel
Mounting screws included
Slotted for ventilation
Robust construction prevents sagging