Eddystone Broadcast S7603 3kW FM Transmitter

eddylogo

The S7603 FM transmitter is an evolution of the highly modular architecture for which
Eddystone Broadcast transmitters are known. The use of 300W hot-pluggable Power
Amplifier modules means that removal of amplifiers can be carried out with minimal
reduction in output power. The design also features highly efficient hot-pluggable
switched mode power supplies which also provide ease of servicing. Both PA and SMPSU modules are common to the entire 7600 range from 500W to 20kW,
resulting in greatly reduced spares holding costs for networks and groups.

Eddystone Broadcast FM Transmitter Transmitters he S7603 FM transmitter is an evolution of the highly modular architecture for which Eddystone Broadcast transmitters are known. The use of 300W hot-pluggable Power Amplifier modules means that removal of amplifiers can be carried out with minimal reduction in output power. The design also features highly efficient hot-pluggable switched mode power supplies which also provide ease of servicing. Both PA and SMPSU modules are common to the entire 7600 range from 500W to 20kW, resulting in greatly reduced spares holding costs for networks and groups.

System Overview

The drive input is fed to an internal 12 way splitter which provides the PA module input drive. Each E2021 Power
amplifier uses dual packaged MOSFET’s mounted on a substantial heatsink assembly with minimum airflow over RF
components. DC power is fed to the RF modules from the 6 switched mode power supplies. Internal control and self
protection in case of reverse power, excess current or over temperature is handled within each individual E2021 power
amplifier module with all monitoring being microprocessor derived. Each module transmits its internal parameters to the
central transmitter controller/monitor (E2023) and parameters are displayed on an easy to read backlit LCD screen.
Outputs from the 12 Power modules are combined via a highly efficient 12 way common rail Wilkinson combiner. The
combined RF output is then fed to the output coupler and harmonic filter.

MIDSOUTHLOGO.3gif

REQUEST A QUOTE

Features

Compact Amplifier and PSU Modules are replaceable On Air
Fully compliant with ETS 300 384 specification for FM transmitters
Easily configured into a wide range of system architectures
Uses highly efficient SMPS power supplies with PF correction
Comprehensive remote control and monitoring facilities
LCD display ensures easy local monitoring

Cooling Systems

Eddystone Broadcast low power transmitters have self contained redundant cooling fans mounted on the rear of the
transmitter. This cooling system can be ducted if required and bespoke systems can be provided to meet special
requirements.

Specifications

Power Output
3kW (Adjustable to -6dB)
Operating Frequency
87.5 to 108 MHz
RF Output Load Impedance
50 ohm unbalanced
RF Output Connector
7-16 (female) DIN (7/8″ available on request)
Maximum VSWR
Able to maintain full power at 1.5:1 before protection cuts in
Mains Power Supply
Single phase 176-264V
RF Harmonic Output
Better than or equal to -79dBc
Power Factor
Typically 99%
Ambient Temperature Range
0°C to +55°C at an altitude up to 3000M
Overall Efficiency
Typically 60%

 

MIDSOUTHLOGO.3gif

REQUEST A QUOTE

description model height in rack units
EXCITER/TRANSMITTERS  
10W stereo exciter/transmitter XE10S 1u
30W stereo exciter/transmitter XE30S 1u
45W stereo exciter/transmitter XE40S 1u
75W stereo exciter/transmitter XE75S 2u
150W stereo exciter/transmitter XE150S 2u
300W stereo exciter/transmitter XE300S 2u
AMPLIFIERS  
Low cost semi-modular 500W amplifier XA500 3u
Low cost semi-modular 1kW amplifier XA1000 3u
Eddystone 500W modular amplifier S79005/10 7u
Eddystone 1kW modular amplifier S7601/10 12u
Eddystone 2kW modular amplifier S7602/10 14u
Eddystone 3kW modular amplifier S7603/10 20u
Eddystone 5kW modular amplifier S7605C/10 26u
Eddystone 10kW modular amplifier S7610C/10 45u
OPTIONAL EXTRAS FOR AMPLIFIERS AND EXCITERS  
TCP/IP TCP/IP
Spare Amplifier module E2021-07
Spare power supply module E2322-01/CC
DUMMY LOADS  
250W dummy load CRC-10
400W dummy load CRC-11
600W dummy load CRC-12
1kW dummy load CRC-13
2.5kW dummy load CRC-15
5kW dummy load TBA
10kW dummy load CRC-17
CABINETS  
15u x 600mm deep. Fully wired and tested 15u cab 15u
24u x 600mm deep. Fully wired and tested 24u cab 24u
36u x 600mm deep. Fully wired and tested 36u cab 36u
42u x 600mm deep. Fully wired and tested 42u cab 42u
PROGRAMME INPUT AND MONITORING EQUIPMENT  
Audio processor DSPX mini 1u
Audio processor Omnia One 1u
Guardian 3 audio selector unit Guardian 3 1u
RDS encoder PRO-01 1u
Modulation monitor DB4004 1u
Audio amplifier/speakers RM2/S4 1u
12 way mains distribution unit MDU12 1u
Exciter changeover unit E2075-01 1u
Studio to transmitter link system. One stereo channel. Complete with Transmitter, receiver, 2 x antennas and 2 x cables with installation accessories. Frequency to be stated at time of order. RSL/TSL900 TX-1u, RX-1u
Remote monitoring & control unit. Connects to multiple transmitters at site using TCP/IP interface. Connects remotely via customers LAN. Includes dial up GSM modem for text alerts and 2 x one-wire temperature sensors. Also incli=udes parallel I/O to connect to other station alarms and remote software to set up control computer. Also allows control of multiple sites on a single screen. (Remote computer not included) IRMU 1u
PACKING  
Crating for transmitters 6u to 15u crating 0
Crating for transmitters 16u to 25u crating 1
Crating for transmitters 26u to 35u crating 2
Crating for transmitters 36u+ crating 3

MIDSOUTHLOGO.3gif

REQUEST A QUOTE

Eddystone Broadcast S7603 3kW FM Transmitter


 

PRODUCTS

MIDSOUTHLOGO.3gif

creditcards

 inetparts.com Electrical Electronic Industrial Parts and Products Index

 REQUEST A QUOTE

AAAC All Aluminum 6201 Alloy Conductor Wire Cable

AAC All Aluminum Conductor Wire Cable

Access Control Wire Cable Plenum Non Plenum

ACSR Aluminium Conductor Steel Reinforced Cable

 Aluminum Utility Wire Cable 

dryerl

Clamp Current Meter Digital Power Meters

CONDUIT ELBOWS

Electrical Cable Support Wedge Body

Explosion Proof Portable Lights Cords

Explosion Proof Unit Heaters – GUX

FS_LOGO_JUNE14

 

Fiber Optic Cable

Figure 8 Telephone Cable

Fire Alarm Cable Armored MC FPLP

Fire Alarm Cable Plenum & Riser

Head End Modular Systems

Hydraulic Hole Punch Kits

Innerduct

Ilsco

kflogo1

LED Lighting

MC Feeder Cable Large Size with Aluminum Armor

MC Steel Metal Clad Cable Wire interlocking steel armor

MC Wire Cable Parking Deck Lot PVC Jacketed

Mining Portable Power Cable Cord

NEMA 1 3 3R Weather Proof Rain Tight Box Enclosure Wire Way Wireway

https://inetparts.com/wp-content/uploads/2014/05/ntk_logo.jpg

PECO APPROVED ENCLOSURES

Photovoltaic PV Cable Aluminum 2kv

POTTER1

Pump Wire Cable

SHD-GC Portable Power Cord 2kv 5kv 8kv 15kv 25kv

SOOW Cable Cord Wire

SignaMax1_Logo1

Stainless Steel Conduit Systems 304 and 316

Teck 90 Wire Cable

Telephone Direct Burial Wire Cable PE-89

Telephone Direct Burial Wire Cable PE-39

Temporary Power Equipment        

VFD Cable  

Eddystone Broadcast S7603 3kW FM Transmitter

 

inetparts.com Electrical Electronic Industrial Parts and Products Index

Eddystone Broadcast S7603 3kW FM Transmitter

Visit us at our other webs:

midsouthcable.com     midsouthelectronics.com      midsouthglobal.net

webnetcable.com            webelectrical.net        ruggednetworks.net     inetparts.com       midsouthlighting.com 

FB_Good1

 Eddystone Broadcast S7603 3kW FM Transmitter

*Prices are subject to change without notice.  Inventory is subject to prior sale. Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product.

Not Responsible for errors in print, verify all data with us or manufacturer. Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice. All Data Subject To Change Without Notice.

Eddystone Broadcast S7603 3kW FM Transmitter