Key Features

10/100/1000BaseT/TX to
100/1000Base SFP Media Converter
Media Converters
• Dual-Rate 1000Base or 100Base SFP Capability
• Extremely Low Latency Supports Larger Multi-Hop Networks
• Extremely High Reliability; MTBF of Over 121 Years
• Gigabit Transmission Supports 9K Bytes Jumbo Frames
• Supports IEEE 802.3x Flow Control for Full Duplex and Back
Pressure for Half Duplex
• DIP Switch Configuration for Link Fault Signaling, Fiber
Auto/Force Mode, and SFP Speed
• Full Wire-Speed Forwarding Rate
• Supports Wall Mounting, DIN-Rail Mounting or Use with Media
Converter Rack Mount Chassis
• Limited Lifetime Warranty

 “PART NO. DESCRIPTION”
[065-1196SFPDR]

10/100/1000BaseT/TX to Dual-Rate 100Base or 1000Base SFP Media Converter”
“Fiber types, 100 or 1000Base speed, and distances spanned are SFP module-dependent”

CONTACT US

Visit us at our other webs:

midsouthcable.com     midsouthelectronics.com      midsouthglobal.net

webnetcable.com            webelectrical.net        ruggednetworks.net     inetparts.com       midsouthlighting.com 

More Signamax Connectivity Network Products 

Specifications

Applicable Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control
Ports
1 – RJ-45 10/100/1000BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port.
1 – Dual-rate 1000Base or 100Base SFP receptacle.
LED Status Indicators
Power; LFS Status; Link Copper; Link Fiber;
Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
SFP fiber port speed indicator.
Peformance
Latency: ≤1.6 μs (FIFO).
MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress
Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets);
@ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Fiber Interface
SFP-dependent. See page D1 – D4 for SFP ordering information.
See our website at www.signamax.com for SFP specification information.
Power
Power Requirement: 12 V DC. External 100 – 240 V AC 50/60 Hz.
Power supply included.
Environmental Requirements
Operating Temperature: 32°F to 122°F (0°C to 50°C);
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)
Physical Characteristics
Case Dimensions: 4.33″ L x 3.16″ W x 0.91″ H
(109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)
Certifications
Safety: CE Mark Class A;
EMI: FCC Part 15 Class A; VCCI Class A
Manufactured in an ISO 9001 facility.
Warranty
Limited Lifetime