Single Fiber WDM Media Converters Converter

10/100BaseT/TX to 100BaseFX

Key Features Single Fiber WDM Media Converters Converter

• Built-In 10/100BaseT/TX Switch
• Doubles the Capacity of Fiber Optic Networks
• Available with SC Simplex Connector
• Link Fault Signaling, For Use with Managed Switches
• DIP Switches for Forcing Speed and Duplex Mode On Ports
• Utilize Store-and-Forward Architecture
• Supports Wall Mounting, DIN-Rail Mounting or Use with
Media Converter Rack Mount Chassis
• USB Power Option for Added Convenience
• Limited Lifetime Warranty

More Signamax Network Connectivity Products

Contact Us

Ordering Information Single Fiber WDM Media Converters Converter

PART NO.    DESCRIPTION
065-1176ALFS    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/SM, Tx=1310 nm; Rx=1550 nm, 20 km Span
065-1176BLFS    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/SM, Tx=1550 nm; Rx=1310 nm, 20 km Span
065-1176AEDLFS    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/SM, Tx=1310 nm; Rx=1550 nm, 40 km Span
065-1176BEDLFS    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/SM, Tx=1550 nm; Rx=1310 nm, 40 km Span
065-1176ALFSMM    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/MM, Tx=1310 nm; Rx=1550 nm, 2 km Span
065-1176BLFSMM    10/100BaseT/TX to 100BaseFX Single Fiber (WDM) Media Converter
SC Simplex/MM, Tx=1550 nm; Rx=1310 nm, 2 km Span

Specifications: Single Fiber WDM Media Converters Converter

Applicable Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX, 100BaseFX
Ports
1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDIX port; Category 5 or
better cable, 100 m maximum distance for 100BaseTX, Category 3 or better
cable, 100 me maximum distance for 10BaseT plus
1 – WDM fiber optic 100BaseFX port; 9 μm SM fiber optic cable, spanning
20 km maximum distance (065-1176ALFS and 065-1176BLFS)
or 1 – WDM fiber optic 100BaseFX port; 9 μm SM fiber optic cable, spanning
40 km maximum distance (065-1176AEDLFS and 065-1176BEDLFS)
or 1 – WDM fiber optic 100BaseFX port; 62.5 μm or 50 μm MM fiber optic
cable, spanning 2 km maximum distance (065-1176AEDLFSMM and
065-1176BEDLFSMM)
LED Status Indicators
Per Unit: Power status, RJ-45 port speed; Per Port: LNK/ACT, FDX/COL;
Performance
Latency: < 4.2 μs (LIFO)
Throughput @ 100Base: 148,809 pps (64-byte packets)
Speed: 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20
Mbps for half/full duplex; Switching Method: Store-and-Forward
Maximum MAC Addresses: 1,024 entries; Memory: 256 KB
Power
Power Requirement: 12 V DC. External 100 – 240 V AC 50/60 Hz.
Power supply included.
USB power connector on the rear panel optionally powers converter from
computer’s USB port.
Environmental Requirements
Operating Temperature: 32°F to 122°F (0°C to 50°C);
Storage Temperature: -13°F to 158°F (-25°C to 70°C)
Relative Humidity: 10% to 95% (non-condensing)
Physical Characteristics
Case dimensions: 4.33″ L x 3.16″ W x 0.91″ H
(109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)
Certifications
Safety: CE Mark Class A
EMI: FCC Part 15 Class A; VCCI Class A
Manufactured in an ISO 9001 facility.
Warranty
Limited Lifetime