Unmanaged Industrial Ethernet Switches Hazardous Locations UL 1604 Class 1, Division 2

10/100 Unmanaged Industrial Ethernet Switch Switches for use in Hazardous Locations UL 1604 Class 1, Division 2. Meets NEMA TS1 and TS2 Environmental Requirements for Traffic Control Equipment.

Key Features: Unmanaged Industrial Ethernet Switches Hazardous Locations UL 1604 Class 1, Division 2

• Meets NEMA TS1 and TS2 Environmental
Requirements for Traffic Control Equipment
• Meets IEC61000-6-2 EMC Generic Standard
Immunity for Industrial Environment
• UL 1604 Class 1, Division 2 Classified for Use in
Hazardous Locations
• Alarms for Power Failure and Port Link Failure
via Relay Output
• Redundant 1.5 Amp rated, 24 V DC Terminal
Block Power Inputs

Ordering Info

PART NO.     DESCRIPTION
065-7405TB       5-Port 10/100 Unmanaged Industrial Switch, 24 V DC Redundant Power Terminal Block
065-7408ATB    8-Port 10/100 Unmanaged Industrial Switch, 24 V DC Redundant Power Terminal Block
065-74091FXSCTB      8-Port 10/100 Unmanaged Industrial Switch + 1-Port 100BaseFX, SC/MM 2km Span,
24 V DC Redundant Power Terminal Block
065-74091FXSTTB      8-Port 10/100 Unmanaged Industrial Switch + 1-Port 100BaseFX, ST/MM 2 km Span,
24 V DC Redundant Power Terminal Block
065-74091FXSMTB     8-Port 10/100 Unmanaged Industrial Switch + 1-Port 100BaseFX, SC/SM 15 km Span,
24 V DC Redundant Power Terminal Block

More Signamax Network Connectivity Products

Contact Us

Specifications: Unmanaged Industrial Ethernet Switches Hazardous Locations UL 1604 Class 1, Division 2

Applicable Standards
IEEE802.3 10BaseT
IEEE802.3u 100BaseTX / 100BaseFX
IEEE802.3x Flow Control and Back pressure
Ports
5 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports
(065-7405TB)
8 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports
(065-7408ATB)
8 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports
plus 1-100BaseFX port, SC/MM, 2 km span (065-74091FXSCTB)
8 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports
plus 1-100BaseFX port, ST/MM, 2 km span (065-74091FXSTTB)
8 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX ports
plus 1-100BaseFX port, SC/SM, 15 km span (065-74091FXSMTB)
LED Status Indicators
Per Unit: Power1 (Green), Power2 (Green), Fault (Red)
Per Port: Link/Activity (Green), 100 Mbps Speed (Amber)
Peformance
Latency: <7.1 μs (LIFO).
Throughput: 14,880 pps for 10 Mbps, 148,800 pps for 100 Mbps (64-byte
packets)
Switch Fabric Speed: 24.0 Mbps (non-blocking, wire speed performance)
MAC Address Capacity: 2 K MAC addresses
Buffer Memory: 768 Kb
Switch Architecture: Store and Forward
Power
DC Input Range: 10 to 48 V DC, Connected via Redundant Terminal Block.
See page C17 for DIN-Rail Mount Industrial Power Supplies
Environmental Requirements
Operating Temperature: -40°F to 167°F (-40°C to 75°C)
Storage Temperature: -50°F to 200°F (-45°C to 93°C)
Relative Humidity: 10% to 95%, (non-condensing)
Physical Characteristics
Dimensions: 1.97″ W x 5.35″ H x 4.33″ D (50 mm x 136 mm x 110 mm)
Housing: IP30 protection, metal case
Weight: 1.76 lb (0.8 kg)
Certifications
NEMA TS1/2 Environmental requirements for traffic control equipment
Safety: UL 1604: Classified for ITE Equipment for use in hazardous locations:
Class 1, Division 2 group A, B, C, & D:
Temp Code T4A; -25C < Tamb < 74C
UL 60950, EN 60950, IEC 60950, IEC 61000-6-2
EMI: FCC Class A, Part 15; CE EN6100-6-2, CE EN6100-6-3
EMS: ESD Standards (EN61000-4-2); Radiated RFI Standards
(IEC 61000-4-3); Burst Standards (IEC 61000-4-4); Surge Standards (IEC
61000-4-5); Induced RFI Standards (IEC 61000-4-6); Magnetic Field Standards
(IEC 61000-4-8); Voltage Dip Standards (IEC 61000-4-11)
Environmental Test Compliance: Vibration Resistance (IEC 60068-2-6 Fc);
Operation/Storage/Transport Shock (IEC 60068-2-27 Ea); Free Fall (IEC
60068-2-32 Ed)
Warranty
Five Years